65ZGB Series Heavy Duty Transfer Pump High Chromium Wear Resistant In Blue

Overview​

The 65ZGB Series Centrifugal Slurry Pump is a horizontal, single-stage, single-suction, cantilever, double-pump centrifugal slurry pump. In order to meet the needs of high-speed development of mining, power, metallurgy, coal and other industries, improve the Model of slurry pump under high lift conditions, and summarize the comprehensive information of domestic and foreign experience and user feedback, and develop a new generation of high efficiency, ZGB series slurry pump with large flow, high lift and multi-stage series.

The 65ZGB Series Centrifugal Slurry Pump structure is reasonable, efficient and safe. It is widely used in the electrical, metallurgical, mining, coal, building materials, chemical, desulfurization and other industrial sectors to transport abrasive or corrosive slurry, especially power plant ash.

Type meaning

65ZGB(P)

65-------------Discharge Diameter (mm)

Z----------------Slurry Pump

G----------------High Head

B---------------- Series Code

P-----------------Multi-stage pumps (3-4stage)

150ZGB Performance Chart

Application

Mill discharge

Ni acid slurry

Coarse sand

Coarse taillings

Phosphate mixture

Minerals concentrate

Heavy media

Sugar beet

Dredging

Bottom/Fly ash

Lime grinding

Oil sands

Mineral sands

Fine taillings

Slag granutation

Phosphoric acid

Coal

Flotation

Process chemical

Phosphoric acid

Structural features:

The ZGB slurry pump has the same structure except for the pump head part (including the front and rear pump casings, the volute casing, the front and rear guard plates, the impeller, etc.), and the rest of the structure is similar. The same series of transmission parts are used, and the pump head part and the shaft seal part are pressed below. And the transmission part, respectively, describes its structural characteristics.

1, ZGB slurry pump shaft seal part: shaft seal has three forms, the auxiliary impeller shaft seal and packing shaft seal, mechanical seal.

(1) Mechanical seal: For the condition that is not suitable for the above two shaft seals, mechanical seal is adopted to reduce the number of maintenance of the shaft seal part.

(2) Packing shaft seal: The packing shaft seal structure is simple, the maintenance is convenient, and the shaft seal water is needed. For the working condition which is not suitable for the shaft seal of the auxiliary impeller and the working condition for pumping, the packing shaft seal can be used.

(3) Sub-impeller shaft seal: Single-stage pump or multi-stage series third-stage pump when the positive pressure of the pump inlet is not more than 10% of the pump outlet pressure value, the auxiliary impeller shaft seal can be used, and the auxiliary impeller shaft seal has no Dilute the slurry, the sealing effect is good and so on.

2. ZGB slurry pump pump head part: ZGB series slurry pump is a double pump shell structure, namely the front pump casing, the rear pump casing and the replaceable over-current part (including impeller, volute, front guard, Rearguard). The front and rear pump casings are made of gray cast iron or ductile iron according to the working pressure. They are vertically opened and bolted. The rear pump casing has a stop and bolts connected to the bracket. The discharge port of the slurry pump can be installed at eight angles. The front and rear covers of the impeller are equipped with back blades to reduce leakage and improve pump life and efficiency. The inlets of all types of pumps are horizontal, and the pump rotates clockwise as seen from the transmission direction.

3. Transmission part: ZGB slurry pump adopts the same series of transmissions, including bracket and bearing assembly. The pump shaft has large diameter, good rigidity, short cantilever, and will not bend and vibrate under severe working conditions. The bearing adopts single row cone. Roller bearing and deep groove ball bearing can be combined to withstand the maximum axial and radial load of the pump. The bearing is lubricated with thin oil. The end of the bearing body has a sealed end cap, which can effectively prevent the slurry and other dirt from entering the bearing. ZGB slag The slurry pump is provided with two hose joints in the bearing body, which can be connected with the water source to cool the bearing chamber, so it can work under high ambient temperature to ensure the safe operation of the bearing and has a high life.

Structural Drawing

Selection & Performance Chart

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.